Wednesday, December 10, 2008

Sweater: Deconstructed

And then reconstructed to fit much better.

I get 99% of clothes for myself and the boys at the thrift store. I love my thrift store. I have so many good things to say about thrift shopping that it deserves it's own post. Soon. But today we're talking about a sweater.
It's a beautiful sweater. The colors are so earthy and warm, perfect for fall. I love the rolled neck line. I hate the fit. I can never try things on at thrift stores because I always have a baby on my back and a preschooler in the cart and honestly, for $.50 I can afford for a few things to not fit quite right. Usually things that don't fit get turned around and immediately re-donated, but I thought this sweater deserved one last chance. It's a size Large, and I need it to be about a medium. I had already taken in the side seams by about two inches, but it fit very poorly in the shoulders. It really needed to be taken apart and overhauled. So here is what I did:


First I took out the serging from the previous attempt at taking in the sweater. Then I created a new arm scye about an inch inside the old one.



Next I trimmed the excess from the sleeve. Here are all my pieces once they've been cut down to size:
I also opened the sleeve about half way down the arm. The sweater was baggy under the arm too so I made the new arm scye a little smaller. When this is sewn up it will blend gently into the rest of the arm. Then I opened the sweater flat, and pinned the sleeve to the shoulder, right sides together.



For most projects that use the serger, I don't bother to sew before I serge. It's an extra step and I have very little patients. But for a project like this I do sew first. That way I can try it on before I serge. A single sewing machine seam is a lot easier to rip out then a serged seam if for some reason it's not quite right.



I tried it on at this point, to make sure the shoulder seams were in the right place. You want this seam serged before you sew up the side seam and underarm, so better to make sure it fits now. Once you're sure the seams fall nicely, go ahead and serge or zigzag stitch this seam.



Next you'll sew and then serge the side seams. Start at the hem and sew toward the armpit. Once to the point where the body meets the sleeve, line up your seams and sew on into the arm seam. Side seam and under arm seam are done in one long seam. Again you may want to try it on before you go back and serge this seam.



To finish your seams, thread all of your loose threads through a large eye needle and thread back through the first half inch of serging.


And you're done!!

1 comment:

ELINDSIAH said...

you are amazing, inspiring & talented!